EasyManua.ls Logo

Bertram 540 - Battery Charger

Default Icon
392 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
540
10
ELECTRIC SYSTEM
Studio ti 03312 540-04usa
247
10.14 BATTERY CHARGER
On board of your BERTRAM 540 are located two battery chargers, fully
automatic and of high performance (CHARGEMASTER type). The
battery charger is equipped with a special charging technique, improved
to charge the batteries rapidly and safely, while powering the connected
users. Besides the charger is protected from short-circuits, overloads and
high temperatures (engine room). On the battery charger three buttons
(1, 2 and 3) and one LCD display (4) allows to show data and information.
Battery charger buttons
1. POWER
Keep the key (POWER) pressed for 3 seconds in order to start the
battery charger or set it to the stand-by mode.
Green lit = on
Orange lit = stand-by
2. INFO
Press key (INFO) shortly to display the sequence of the
CHARGEMASTER data.
3. SOURCE
Select (SOURCE) to choose the battery bank (1, 2 or 3) you wish to
check.
j
WARNING
For further information concerning the battery charger, refer to
manufacturer’s manual.
S
CAUTION
The connection between the electric network and the battery charger is
not interrupted with the selector switch.

Table of Contents

Related product manuals