Bertram 540 - Instrumentation and Navigation Lights

540
MAINTENANCE
Studio ti 03312 540-04usa
318
14
14.6.5 Instrumentation and navigation lights
Use clean wet rags for cleaning.
After navigation, cover instrumentation and equipment.
MAINTENANCE
At least once a week check the operation of the navigation lights.
At least once a week carry out accurate cleaning of glasses and
headlights.
At least once every six months check the presence of corrosion in the
connections of the navigation light cables.
At least once every six months, tighten the cable connections of the
navigation lights.
MAINTENANCE
At least once a week check the operation of the gauge cluster in the fly
and of all instruments on board.
At least once a week carry out cleaning.
At least once every six months protect the piston for fly gauge cluster
opening with proper products.
S
CAUTION
Do not use chemical or abrasive products.