540
9
HYDRAULIC SYSTEMS
Studio ti 03312 540-04usa
193
9.3 REFILLING THE WATER TANK
− Ensure that the yacht is properly moored; we suggest to stop the
engines and the generator.
− Loosen the fill fitting plug and insert the hose, which must have the
correct dimensions. The water fill fitting is inside of the cockpit
afterpeak.
− During refilling, check the tank level though the gauge located on the
general electric panel. off the salon.
− At the end of filling, remove the hose and tighten filler plug.
NOTICES
Replace freshwater in the tank frequently, and, if necessary, disinfect
the system with suitable products. Never leave the yacht unattended
while taking on fresh water. If there is a risk of freezing, do not top off
tanks.
S
CAUTION
During the refilling of fresh water pay attention to the filling hose. Water
spillage may cause electrical short-circuits. Do not leave the fresh water
hose and fill fitting unattended.
Inlet fitting
Level gauge
To Next Page
Loading...