540
PROPULSION SYSTEMS
Studio ti 03312 540-04usa
142
8
8.7.1 Gearbox service
Item Maintenance Notes and precautions
Gearbox Oil level check
Oil change
Suction filter check
Oil filter replacement
For correct procedures about maintenance and check, refer to the manual provided by the
Manufacturer.
Refer to gearbox plate, to determine the oil type and viscosity grade recommended by the
manufacturer.
Remove the suction filter cap uphill the sump, positioned near the gearbox connection/
propeller shaft area. Remove filter and gasket. Carry out check according to the time
intervals suggested by the manufacturer.
Have the expected maintenance carried out at correct time intervals and by authorized and
qualified personnel only, to keep the gearboxes perfectly efficient.
To Next Page
Loading...