540
PROPULSION SYSTEMS
Studio ti 03312 540-04usa
166
8
j
WARNING
Close the valves if not in use.
k
DANGER
Take care that oil does not hit the skin. During maintenance operation
wear gloves and safety glasses. If you come in contact with lube oil
wash the hit part immediately and accurately with water and soap.
k
DANGER
Any maintenance intervention on the engines ad on the inverters is to
be carried out with engines shut off, after they have sufficiently cooled
down and after preventing their switching on by disconnecting the
circuit breakers.
S
CAUTION
Do not remove the tank filling plug when the engine activated,
because the hydraulic installation under pressure may cause injuries.
Before releasing pressure, stop the engine.
k
DANGER
The spilling of hydraulic oil under pressure may cause injuries: before
disconnecting or connecting the hoses, stop the engine and operate the
controls to release the residual pressure. Prevent the engines from
starting when the pipes are disconnected.
k
DANGER
The use of the gearboxes and engines with a low quantity of oil, may
damage them.
An excessive quantity of oil may cause seals and vents to leak and can
remarkably increase the operation temperature.
b
DANGER
No open flames, no electric sparks. Do not smoke. Avoid ignition
sources. Risk of fires and explosions!
To Next Page
Loading...