Binder CB 160 - Type Plate

CB (E6.1) 07/2017 Page 10/145
1.4 Type plate
Position of type plate: left chamber side (seen from front), at the bottom in the middle
Figure 2: Type plate (example of CB 160 regular chamber)
Indications of the type plate (example)
Information
BINDER
Manufacturer: BINDER GmbH
CB 160
Model designation
CO2 incubator
Device name
Serial No.
00000000000000
Serial no. of the chamber
Built
2017
Year of construction
Nominal
temperature
187 °C
369 °F
Nominal temperature
IP protection
20
IP type of protection acc. to standard EN 60529
Temp. safety device
DIN 12880
Temperature safety device acc. to standard DIN 12880
Class
3.1
Class of temperature safety device
Art. No.
9040-0092
Art. No. of the chamber
Project No.
---
Optional: Special application acc. to project no.
1,30 kW
Nominal power
230 V / 50 Hz
Nominal voltage ± 10% at the indicated power frequency
230 V / 60 Hz
1 N ~
Current type
5,7 A
Nominal current
Symbol on the type plate
Information
CE conformity marking
Electrical and electronic equipment manufactured / placed on
the market in the EC after 13 August 2005 and to be disposed of
in separate collection according to Directive 2012/19/EU on
waste electrical and electronic equipment (WEEE).
(CB-UL only)
The chamber is certified by Underwriters Laboratories Inc.
®
according to the following standards:
CAN/CSA-C22.2 No. 61010-1, 2
nd
Edition, 2004-07
UL 61010-1, 2
nd
Edition, 2005-07-22
Nominal temp.
187 °C
1,30 kW / 5,7 A
369 °F
230 V / 50 Hz
IP protection
20
230 V / 60 Hz
Safety device
DIN 12880
1 N ~
Class
3.1
Art. No.
9040-0092
Project No.
Built
2017
CO2 incubator
BINDER GmbH
Im Mittleren Ösch 5
78532 Tuttlingen / Germany
www.binder-world.com
CB 160
E6.1
Serial No. 00000000000000
Made in Germany