Binder CB 160 - Equipment and Options

CB (E6.1) 07/2017 Page 131/145
All indications are average values, typical for chambers produced in series. We reserve the right
to change technical specifications at any time.
22.5 Equipment and Options
To operate the chamber, use only original BINDER accessories or accessories / components
from third-party suppliers authorized by BINDER. The user is responsible for any risk arising
from using unauthorized accessories.
Regular equipment
Multifunction controller T4.12 for temperature and CO
2
(and for O
2
with chamber with O
2
control)
CO
2
infra-red absorption measuring system
Fan-assisted air jacket system
Hot-air auto sterilization at 187.5 °C / 369.5 °F
Gas mixing head
Permadry™ system
Weldless deep-drawn inner chamber made of stainless steel 1.4301/V2A, polished
Electronic error auto-diagnosis system with zero-voltage relay output
Zero-voltage relay alarm output with DIN socket (6 poles), DIN plug included
Tightly closing inner glass door;
or divided inner door, gas-proof, stainless steel, 4 times (CB 60, CB 160), 6 times (CB 220)
3 perforated shelves, stainless steel 1.4301/V2A
Overtemperature safety controller class 3.1 acc. to DIN 12880:2007
Ethernet interface
Programmable key lock
Options / accessories
Perforated shelf ,stainless steel
Stable perforated shelf with additional fixation for shaker operation
Reinforced shelf stainless steel with 1 set of rack lockings
Rack lockings (4 pieces)
Lockable door
Shelves for divided inner door, gas-proof, stainless steel
Stacking stand with castors lockable by breaks (CB 150 / CB 210)
Stacking adapter for direct, thermally decoupled stacking
Base with castors
Stacking adapter for combination C 150 on top of CB 160
Silicone access ports closable with 2 silicone plugs
BINDER Gas Supply Service: External CO
2
bottle changer CO
2
, O
2
or N
2
Connection kit for CO
2
, O
2
or N
2
cylinder
Water tight internal socket 230 V (max. 3 A), with turn-off switch
Analog output temperature and CO
2
4-20 mA 4-20mA with DIN socket (6 poles), DIN plug included
Cleaning kit (neutral cleaning agent, disinfection spray and lint-free disposable wipes, gloves and
goggles)
Intelligent Fail-Safe CO
2
monitoring function
CELLROLL roller system with set of connection cables and extra-low voltage access port
Access port (8-pin) for extra-low voltage (ELV) with LEMO socket (can be covered) and LEMO
connector, maximum power rating 24VAC/DC – 2.5 Amp