CB (E6.1) 07/2017 Page 83/145
12. Event list
The “Event list” displays status information and errors of the current day. You can also access the events
of past days.
To access the event list, go to Menu > Event list or User > Show event list
08.03.2013 15:05:18
Submenu “Event list” (example).
The events of the current day are displayed. The
most recent message appears at the end of the list.
If you want to acknowledge an active alarm, proceed
as described in chap. 11.4.
Messages of indicated day
Temperature setpoint 35.00
Temperature setpoint 37.00
Alarm set Safety controller overtemperature
Alarm acknowledged Safety controller overtemp.
Alarm cleared Safety controller overtemperature
Close Reset Home
When there is more information than one page, you can scroll the event list in both directions with the
operating button.
To select a different date, select “Messages of indicated day” and press the operating button. You can
enter the desired date through an entry menu.
08.03.2013 05:05:06
Entry menu “Select date”.
The current date is shown. Enter the desired date
with the operating button.
Press the “Ok” button to confirm.
0
Ins Pos1 End Ok
Close Ok Home
The event list of the selected date is displayed.
To Next Page
Loading...
