CB (E6.1) 07/2017 Page 96/145
15.8 Stands
15.8.1 Stacking stand (option)
We recommend not stacking CB incubators directly on top of one another in order to avoid transmission
of shocks and vibrations from one chamber to the other. This could happen e.g. while opening or closing
the door, cleaning, charging and discharging the chamber. BINDER offers stable, vibration-free stands
with castors (2 lockable by brakes) for the safe stacking of two chambers.
The stacking stand ensures that the set incubation parameters are precisely maintained also during
sterilization of the other chamber in the same stacking stand (chap. 18.3) by thermal decoupling.
Using the stacking stand offers more advantages: You can pull the lower chamber forward separately
(e.g., for access to the rear), and not have to place it directly on the floor (important for sanitary purpose).
The mounting instructions 7001-0194 delivered with the stacking stand describe its
installation (Art. No. 9051-0020 for CB 160, Art. No. 9051-0023 for CB 220).
15.8.2 Stacking adapter for direct thermal decoupled stacking (option)
We recommend not stacking CB incubators directly on top of one another in order to avoid transmission
of shocks and vibrations from one chamber to the other. This could happen e.g. while opening or closing
the door, cleaning, loading and unloading the chamber. BINDER offers a stacking adapter for direct
thermal decoupled stacking of two chamber.
The stacking adapter ensures the exact maintenance of the set incubation parameters also during
sterilization of the other chamber in the same stacking stand (chap. 18.3).
The mounting instructions 7001-0145 delivered with the stacking adapter describe its
installation (Art. No. 9051-0032 for CB 60, Art. No. 9051-0026 for CB 160, Art. No. 9051-
0030 for CB 220).
15.8.3 Base on castors (option)
In order to obtain easy access to the chamber and to avoid contamination of the chamber caused by soil
pollution, BINDER recommends using the base on castors.
The mounting instructions 7001-0147 delivered with the base on castors describe its
installation (Art. No. 9051-0031 for CB 60, Art. No. 9051-0028 for CB 160, Art. No. 9051-
0029 for CB 220).
To Next Page
Loading...
