Binder CB 160 - General Controller Settings

CB (E6.1) 07/2017 Page 58/145
9. General controller settings
In the "Settings" submenu, you can enter the date and time, select the language for the menus and the
desired temperature unit, perform the configuration for the controller’s communication functions, and reset
the controller to factory settings.
To access the "Settings" submenu, go to Menu > Settings
Fixed value
08.03.2013 05:05:06
Submenu “Settings”.
Turn the operating button to see addition
al menu
items.
..\ Settings
Setup wizard
Date and time
Sprache, Language, Langue, Idioma, Lingua
Display brightness
Temperature unit
Recording rate
Factory reset
Network settings
Close
Home
Fixed value
08.03.2013 05:05:06
Submenu “Settings” (next page).
..\ Settings
Chamber configuration
RS 422 address (optional)
Close Home
Setup wizard Chap. 9.1
Date and time Setting date and time, chap. 9.2
Sprache, Language, Langue,
Idioma, Lingua
Selecting the controller’s menu language, chap. 9.3
Display brightness Adjusting display brightness by turning the operating button, chap. 9.4
Temperature unit Selecting the temperature unit, chap.9.5
Recording rate Defining the recording rate for data storage, chap. 9.6
Factory reset Factory reset, chap. 9.7
Network settings Network configuration, chap. 9.8
Chamber configuration
Menu for Service purpose – Entering chamber data like the serial no.,
service information
RS 422 address (optional)
Setting the RS 422 chamber address(with option RS422 interface),
chap. 9.10