Binder CB 160 - Page 114

CB (E6.1) 07/2017 Page 114/145
Fixed value
08.02.2017 05:05:06
Initial view after finishing the hot-air sterilization
cycle (sample values).
For further information, press the “Info” button.
Setpoint
Actual value
Temperature [°C]
37.0
37.2
CO2 [Vol.-%]
5.0
---
O2 [Vol.-%]
20.0
---
User
Info
Menu
Sterilization information
08.02.2017 05:05:06
Information menu “Sterilization information”.
Confirm the information with “Ok”.
Sterilization information
STERILIZATION FINISHED
Close Ok Home
Gas control (CO
2
, and O
2
(chamber with O
2
control) is deactivated during and will only be activated after
confirming the information message “STERILIZATION FINISHED” with “Ok”.
Gas control (CO
2
, and O
2
(chamber with O
2
control) will only be activated after confirming the
information message “STERILIZATION FINISHED” with “Ok”.
Then turn on the chamber again (chap. 5).