Binder CB 160 - Page 65

CB (E6.1) 07/2017 Page 65/145
Display the MAC address
To identify the chamber in the Ethernet network you can display the chamber’s MAC address.
Fixed value
08.03.2013 05:05:06
Submenu “MAC address”
(example value)
The MAC address is displayed.
..\ MAC address
00-04-A3-B1-00-B9
Close Home
Go back to the “Network settings” menu with “Close” or to the initial view with “Home”.
Enter the IP address:
Fixed value
08.03.2013 05:05:06
Entry menu “IP address”
(example value)
Enter the desired IP address with the operating
button.
Press the “Ok” button to confirm.
..\ IP address (n.n.n.n.)
1
92.168.0.100
1
Ins Pos1 End Ok 0 2 3 4 5 6 7 8 9 .
Close Ok Home
Go back to the “Network settings” menu with “Close” or to the initial view with “Home”.
Enter the subnet mask:
Fixed value
08.03.2013 05:05:06
Entry menu “Subnet mask”
(example value)
Enter the desired net mask with the operating
button.
Press the “Ok” button to confirm.
..\ Subnet mask (n.n.n.n.)
2
55.255.255.0
2
Pos1 End Ok 0 1 3 4 5 6 7 8 9 , -
Close Ok Home
Go back to the “Network settings” menu with “Close” or to the initial view with “Home”.