Instruction manual NSF VSI / VSI W / VSI T / VSI
TW Safety instructions
38065447002 en-US 17 / 101
3 Safety instructions
The safety instructions must be observed throughout the installation, operation, cleaning and
maintenance procedures.
3.1 General notes on safety
DANGER
Damaged power supply cables or faulty protective devices!
danger to life due to electric current Acute risk of injury of operating
personnel.
– Damaged supply lines must be replaced immediately with new cables
and installed by a professional electrical company or by Bizerba Ser-
vice.
– The mains cable must be routed in a way that it is no cause of risk.
– Protective devices must be checked every day with regards to function
before start-up.
– Protective devices may not be removed, modified or bypassed.
DANGER
Open the electrical installation area!
danger to life due to electric current
– The electrical installation area may only be opened by Bizerba Ser-
vice.
– Pull power plug before moving the machine.
WARNING
Unauthorized persons!
Serious injuries to fingers and hands and damage to health.
– Only trained personnel over 14 years may operate, clean and maintain
the machine. [}5] Subsequent training sessions should be repeated
whenever necessary.
– Unauthorized persons, particularly children, may not stay in the work
area of the machine.
To Next Page
Loading...
Need help?
General
