Instruction manual NSF VSI / VSI W / VSI T / VSI
TW Operation
38065447002 en-US 51 / 101
6.7.1 User management
Call up via the setting in the navigation bar.
Tap .
The user management menu opens.
Every user can change his password with
the login. No password needs to be set until
the production manager level.
Passwords of all lower levels can be set
back to default by technicians or higher. This
can be done for individual users.
Fig.37: User
User groups
Tap <Groups>
Here, user groups can be created.
For each group one user is created as de-
fault value. Name corresponds to the level
name.
Fig.38: Groups
Login settings
Tap <Settings>
Checkmark: Login in case of restart Login
with a password is required.
No checkmark: The <Automatic login> can
be done without a password. The machine is
started with level Production manager.
Fig.39: Settings
Authorization levels:
Level User rights
To Next Page
Loading...
Need help?
General
