Bizerba VSI330 F - Summarized Technical Specifications; Power Supply Requirements

Technical data
Instruction manual NSF VSI / VSI W / VSI T / VSI
TW
96 / 101 38065447002 en-US
9.5 Technical data
VSI / VSI W VSI T VSI TW
Product size, round
with depositing sys-
tem
50 to 180 mm = 2" to
7.1"
50 to 180 mm = 2" to
7.1"
50 to 180 mm = 2" to
7.1"
Product size, rectan-
gle
50 x 50 to 180 x
240mm = 2" x 2" to
7.1" x 9.4"
50 x 50 to 180 x
240mm = 2" x 2" to
7.1" x 9.5"
50 x 50 to 180 x
240mm = 2" x 2" to
7.1" x 9.5"
Slice thickness ad-
justment with de-
positing system
0.3 to 12 mm 0.3 to 12 mm 0.3 to 12 mm
Number of carriage
strokes
30 to 80 strokes/min depending on product sizes
Blade speed 266 r/pm
Weight machine approx. 122 kg = 269
lb
approx. 137 kg = 302
lb
approx. 137 kg = 302
lb
Gross weight approx. 154 kg = 340
lb
approx. 176 kg = 388
lb
approx. 176 kg = 388
lb
Weight, stand approx. 70 kg = 154.3 lb
Checkweigher
Weighing range
Digit interval
50 - 2000 g = 0.1 -
4.5 lb
1 g = 0.002 lb
without scale
50 - 2000 g = 0.1 -
4.5 lb
1 g = 0.002 lb
Noise level during
normal operation
the noise emission value according to DINEN11202 at the worksta-
tion is lower than 70dB(A), related to the entire machine
Noise level during
sharpening
the noise level reaches temporarily up to 82 dB(A)
Types of current,
voltages, power con-
sumption
see identification plate
9.6 Power supply
Technical data of power supply
– Mains supply
Single-phase alternating current, see rating plate
– Permissible mains voltage tolerance (static) normal
At 100 to 400 V: +6% to - 10% of nominal value
– Mains frequency: 50 (60) Hz
Permissible tolerance of mains frequency: +2% to -2% of nominal value