Safety instructions
Instruction manual NSF VSI / VSI W / VSI T / VSI
TW
18 / 101 38065447002 en-US
3.2 Safety instructions for transport and installation
WARNING
Damaged handles, threaded holes!
Risk of injury if handles are not correctly fastened.
– Check handles and threaded holes for damage prior to use.
– Do not use damaged handles or threaded holes.
– Use handles only for lifting the machine.
CAUTION
Carriage might move due to its unladen weight.
Risk of hand injuries due to crushing!
– Be careful when unpacking.
DANGER
Tipping hazard when improperly installed!
This may result in serious injuries and damage to property.
– Installation requirements must be met.
– Operate machine on stand only if its weight rests on the feet and the
casters are locked.
– The machine must only be moved on a level surface with a very low
degree of roughness and unevenness of not more than 2 cm.
– Installation, moving and operation are not permitted on surface that
are not level.
WARNING
Incorrect supply voltage!
Destruction of electric components, fire hazard.
– Do not connect the machine to the power supply if the power supply
data does not correspond to the machine's connection values.
Mains data must be identical.
– Inform Bizerba Customer Service.
To Next Page
Loading...
Need help?
General
