Instruction manual NSF VSI / VSI W / VSI T / VSI
TW Maintenance
38065447002 en-US 63 / 101
8 Maintenance
8.1 Preparation for cleaning
Clean thoroughly:
– before putting into operation
– depending on use and application frequency
– if extremely soiled, several times a day
– after sharpening
– after a longer down time
WARNING
Unprotected blade!
Coming in contact with the sharp blade can lead to serious injuries.
– Always wear cut-proof gloves when cleaning.
– Do not clean the surfaces of the blade when operating the machine!
- The machine is switched on.
- The main page comes up on the touch screen.
- All machine parts are mounted.
Press icon on the navigation bar.
Instructions on the further operating pro-
cedure appear on the touch screen.
Unlock carriage:
Turn out star-grip screw on carriage foot.
Open holding magnet by pressing the
<Execute> button.
Fig.59: Instructions on the further operating
procedure
To Next Page
Loading...
