Instruction manual NSF VSI / VSI W / VSI T / VSI
TW Operation
38065447002 en-US 53 / 101
User Interface colors
Press <Color spectrum>.
User interface colors may be changed.
If 2 equal colors are chosen, the modifi-
cation is denied via error message. Dis-
tance of vector must be at least 50.
Confirm color changes.
Fig.41: User Interface colors
6.8 Inserting the product
CAUTION
There are spikes on the product holder!
Driver hooks on feed carriage, grip hooks!
Risk of injury.
– Use handle when working with product holder.
– Claws are lowered into a rest position.
The machine must not be operated without a depositing table or conveyor
belt.
Any metal clips must be removed from the product.
To safely slice leftover pieces the end of the sliced product has to be cut
off.
NOTICE
If the product is lower than the height of the carriage rear wall, fin-
gers could get jammed between product holder and rear wall.
To Next Page
Loading...
Need help?
General
