Instruction manual NSF VSI / VSI W / VSI T / VSI
TW Installation
38065447002 en-US 23 / 101
4 Installation
4.1 Unpacking instructions
When transporting the machine, shoes with toe caps must be worn and
suitable lifting devices must be used.
For moving the machine at least four people are required. Weight of ma-
chine is higher than 100 kg.
WARNING
Damaged handles, threaded holes!
Risk of injury if handles are not correctly fastened.
– Check handles and threaded holes for damage prior to use.
– Do not use damaged handles or threaded holes.
– Use handles only for lifting the machine.
- Machine is still in packaging.
Insert the four handles [}15] in the drill
holes provided and finger tighten them
manually.
Four persons are needed to lift the ma-
chine out of its packaging and transport
it to the installation site. Pay attention to
the center of gravity of the machine.
Fig.6: Handles, front
To Next Page
Loading...
