Maintenance
Instruction manual NSF VSI / VSI W / VSI T / VSI
TW
72 / 101 38065447002 en-US
Cover interface ports
Cover the USB port of the display and
operating unit using the captive cap.
Cover the Ethernet port of the machine
housing using the captive cap.
Fig.81: Cover interface ports
Now the machine is ready for cleaning.
8.3 Cleaning
Remove the plug and protect against moisture before cleaning.
NOTICE
High-pressure cleaner!
If water gets into the machine it can damage electric components.
– Do not use high-pressure cleaner for cleaning purposes, rinse off ma-
chine with a water pipe.
– The USB / Ethernet ports must be covered using a protective cap if no
cable is plugged in.
– Cover the machine when the surroundings are cleaned with spray and/
or pressurized water.
To Next Page
Loading...
