Instruction manual NSF VSI / VSI W / VSI T / VSI
TW Machine and operating elements
38065447002 en-US 37 / 101
First cut program
The first cut program serves to cut the first slices of a fed prod-
uct and to keep them separate from subsequent regular por-
tions.
First cut discharge
The first cut discharge serves to discharge the slices from the
first cut program. (machine with conveyor belt)
Speed Discharge
Specified the speed at which the sliced product is transported.
Number of carriage strokes
Specifies the number of carriage strokes per minute.
Status of the parameter
Parameter is fixed and can not be changed by parameter vali-
dation or other processes of the machine control (e.g. slicing of
target weight). The parameter can be changed by the operator
(if all the other requirements are met).
The parameter of the currently loaded PLU has been edited.
Parameter is disabled. Input mask cannot be opened. Parame-
ter cannot be changed.
Parameter is visible on the individually configured operator
page (main page).
5.2.2 Anchor symbol
The small colored anchor on the tiles of the parameters <Number of slices>, <Slice
thickness>, <Shingling length> or <Shingling distance> means that the corresponding param-
eter is fixed.
For the parameters <Number of slices> and <Slice thickness> the anchor symbol is only visi-
ble for devices with scale. If the scale is switched off no anchor is displayed.
To Next Page
Loading...
Need help?
General
