Instruction manual NSF VSI / VSI W / VSI T / VSI
TW Safety instructions
38065447002 en-US 19 / 101
3.3 Safety instructions during operation, slicing
WARNING
Rotating blade!
Cut injuries
– Do not allow yourself to become distracted. Concentrate on the task in
hand and avoid time pressure.
– During operation, do not reach into the path of the carriage.
– Never push product ends towards blade by hand.
WARNING
Moving components!
Risk of entanglement, shearing, crushing and being hit.
– Do not wear loose clothing or wear hair down.
– Do not reach into paths of carriage, product holder, gauge plate, de-
positing system, conveyor and depositing table.
– Only clean machine when switched off and power plug is pulled.
CAUTION
There are spikes on the product holder!
Driver hooks on feed carriage, grip hooks!
Risk of injury.
– Use handle when working with product holder.
– Claws are lowered into a rest position.
3.4 Safety instructions for sharpening, cleaning
WARNING
Unprotected blade!
Coming in contact with the sharp blade can lead to serious injuries.
– Always wear cut-proof gloves during the cleaning and sharpening pro-
cedures and shoes with toe caps when the blades are replaced.
– Do not clean the blades when operating the machine.
To Next Page
Loading...
Need help?
General
