Machine and operating elements
Instruction manual NSF VSI / VSI W / VSI T / VSI
TW
44 / 101 38065447002 en-US
Shaving
The sliced product forms a pile of loosely
falling slices. For this purpose a depositing
arm for shaving (optional accessories) is
needed.
In order to mount the depositing arm for
shaving to the chain frame the depositing
arm must first be disassembled. [}64]
Fig.20: Shaving
The depositing type shaving has the same functionality as the depositing type stacking.
The standard values for shaving correspond to the values for stacking.
Slicing to target weight is not possible with depositing type shaving!
NOTICE
Due to the uncontrolled depositing of slices during shaving, the
max. stack height could be exceeded without the machine switching
off.
In this case, the user has to reduce the number of slices manually.
5.3 Paper holder
The paper holder is used when the sliced product has to be delivered straight on to paper or
foil.
Positioning of several sheets of paper or film:
Using your thumb, press lever to the
right against spring pressure until it
clicks into place.
Push the stack underneath the open
holder.
Release the lever by pressing the top of
it lightly out of the locked position.
Fig.21: Paper holder
To Next Page
Loading...
Need help?
General
