Instruction manual NSF VSI / VSI W / VSI T / VSI
TW Installation
38065447002 en-US 27 / 101
4.3.3 Electrical connection
Information on identification plate
Bizerba logo BIZERBA
Machine type Model VSI330 F / VSI330 F W / VSI330 F T /
VSI330 F TW
Machine description Slicer
Machine number ...
Production code X-..
Protection type IP X5
Maximum load of scale Max 2kg / Max 4,5lbs
Scale interval d=0,001kg / d=0,002lbs
Electrical data see identification plate
Manufacturer's address Bizerba GmbH & Co. KG
Wilhelm-Kraut-Str. 65
72336 Balingen, Germany
Check before mains connection
Before you connect the machine, check the electric data on the rating
plate with the mains data about the power supply.
WARNING
Incorrect supply voltage!
Destruction of electric components, fire hazard.
– Do not connect the machine to the power supply if the power supply
data does not correspond to the machine's connection values.
Mains data must be identical.
– Inform Bizerba Customer Service.
Installation of power supply provided by customer
The installation of the power supply to connect our machines must be carried out in accor-
dance with country-specific regulations and rules derived thereof. These essentially include
the recommendations of at least one of the following commissions:
– International Electro-technical Commission (IEC)
– European Committee for Electro-technical Standardization (CENELEC)
The machine has been built according to Protection Type I and has to be connected to the
protective conductor.
To Next Page
Loading...
Need help?
General
