Maintenance
Instruction manual NSF VSI / VSI W / VSI T / VSI
TW
64 / 101 38065447002 en-US
Tilt carriage outward into cleaning posi-
tion within 10 s.
If time was exceeded, press <Execute>
again.
Switch off machine.
Remove the plug and protect against
moisture.
Fig.60: Tilt the carriage to the outside
8.2 Removing components
WARNING
Chain spikes, driver spikes of feeding carriage, gripper hooks, de-
flector edge!
Stab and cut wounds.
Twisted guide cam or chain spikes can cause malfunctions.
– Always wear cut-proof gloves when cleaning.
– Avoid touching the chain spikes.
– Claws are lowered into a rest position.
Do not place parts on top of each other to avoid mechanical damage.
Remove components as follows:
To Next Page
Loading...
Need help?
General
