Safety instructions
Instruction manual NSF VSI / VSI W / VSI T / VSI
TW
20 / 101 38065447002 en-US
WARNING
Chain spikes, driver spikes of feeding carriage, gripper hooks, de-
flector edge!
Stab and cut wounds.
Twisted guide cam or chain spikes can cause malfunctions.
– Always wear cut-proof gloves when cleaning.
– Avoid touching the chain spikes.
– Claws are lowered into a rest position.
WARNING
Missing components!
The operator can only be protected from injuries and the machine
protected against damage if all the components of the machine are
assembled properly.
– Check if the machine is complete before it is re-started.
– Check if components are positioned correctly and firmly.
– Only use original Bizerba spare parts and accessories.
3.5 Protective and safety devices
– Blade guard ring, stationary, cannot be removed
– Blade cover stationary, removable
– Gauge plate, covering carriage stroke area
– Rear wall, cannot be removed
– Stand casters
– Protective cover of chain frame and working area of depositing arm
– Automatic switch-off when drive system is overloaded
– Automatic switch-off of blade and carriage drive when in product loading position
– Cleaning program, locked machine setting
– Sharpening program, locked machine setting
Remaining risks that cannot be excluded by technical measures:
– Risk of tripping/slipping if the work area is not kept tidy.
– Risk of injury if the required personal protective clothing is not worn.
To Next Page
Loading...
