Machine and operating elements
Instruction manual NSF VSI / VSI W / VSI T / VSI
TW
36 / 101 38065447002 en-US
Row spacing crosswise, shingles lengthwise
Specifies the distance between crosswise deposited shingles
lengthwise in the portion (if product dimensions are entered
correctly).
Row spacing crosswise, shingles crosswise
Specifies the distance between crosswise deposited shingles
crosswise in the portion (if product dimensions are entered cor-
rectly).
Row spacing lengthwise, stacks
Specifies the distance between lengthwise deposited stacks in
the portion (if product dimensions are entered correctly).
Row spacing lengthwise, shingles lengthwise
Specifies the distance between lengthwise deposited shingles
lengthwise in the portion (if product dimensions are entered
correctly).
Row spacing lengthwise, shingles crosswise
Specifies the distance between lengthwise deposited shingles
crosswise in the portion (if product dimensions are entered cor-
rectly).
Number of portions
Specifies the number of portions per slicing program.
Other parameters
Automatically close gauge plate
On: Gauge plate closes automatically after machine stop.
Off: Gauge plate does not close automatically after machine
stop (default).
Gauge plate offset
Clearance which is additionally needed for the gauge plate to
open or close during slicing.
Light sensor
Activation switch for light sensor at conveyor belt.
Off/On
Blade speed
Specifies the speed of rotation of the blade in U/min.
To Next Page
Loading...
Need help?
General
