50
On/Off button power mode (8)
Activates/deactivates the power mode. In the activated power mode, the
speed of the motor is increased during delivery and the delivery capacity is
increased
Control switch on (9)
The control is switched on via the "Control on" switch. Only when the control
is switched on can the machine be operated using the operating elements
on the outside of the machine.
Pull switch for work lamp (10)
The pull switch can be used to switch on the work lamp for the interior of the
machine.
➢ If you have switched on the work lamp, it must be switched off at the
end of work, otherwise there is a risk of battery discharge.
Raising/lowering the feeder lever (11)
Risk of crushing in the swivel range of the feeder.
There is a risk of injury within the swivel range of the feeder when
operating the lever for lifting/lowering the feeder.
− No persons may be present within the swivel range of the feeder.
− Wear the required PPE.
The feeder is raised or lowered using the lever (11). The lever must first be
pulled out. The feeder can then be raised or lowered by swivelling the lever
up or down.
To Next Page
Loading...