EasyManua.ls Logo

BMS alpha CR - Filling Mixing Vessel (Feeder Version)

Default Icon
188 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Work mode
7
Operation in working mode
7.7
97
7. Fill the mixing and delivery vessel (1) with the remaining sand, gravel or
aggregates.
8. Check the consistency and top up with water if necessary.
9. Fold the hopper (4) back and clean the edge of the dome.
10. Close the dome cover (see Section 7.7.2).
Version feeder
WARNING
Risk of injury from moving components.
Movable parts can cause severest injuries during operation.
Do not stay within the swivel range of the feeder or its vicinity.
Do not decommission safety devices.
Wear the stipulated personal protective equipment.
WARNING
Risk of crushing in the swivel range of the feeder.
There is a danger of crushing when the feeder is raised and lowered.
When working in the area of the feeder, do not reach into or stay in the
swivel range of the feeder.
Wear the stipulated personal protective equipment.
NOTE
The dome cover of the mixing and delivery vessel must be open when the
feeder is swivelled.
Otherwise the dome cover and the feeder can be damaged.

Table of Contents