Bosch Solution 16i Installation Manual

5-3
Bosch Security Systems 09/11 BLCC500I
Solution 16i  Installation Manual  Access Programming
1) Enter your Installer PIN or Master PIN + [MENU]
2) Enter [1] + [1] + [1] + [OK].
The keypad will display Ur = prompting you to enter
the number of the user to change. Each user in the
system is assigned a user number as well as a PIN
Number.
Ur=
3) Enter the user number to change then press [OK].
EntPin
4) Enter the new PIN.
If an error tone sounds, or “bAdPin” is displayed try a
dierent PIN.
5) Press [OK] to save and exit, or press [MENU] to exit
without saving.
Access > PIN Codes > AddPin
Add PIN

-

MENU 1-1-2
This menu allows a master user or installer to add a PIN
for a new user. Each master user can only program new
PINs for those users that have been assigned to the same
area(s) as the master user.
At factory default, each PIN is xed to 4 digits in length
however this can be changed by your installer to suit your
needs. The default PIN for User 1 (Master user) is 2580.
1) Enter your Installer PIN or Master PIN + [MENU]
2) Enter [1] + [1] + [2] + [OK].
The keypad will display the Ur = prompt.
Ur=
3) Enter the user number that you want to add, then
press [OK].
If you select a user number which already exists, an
error beep will sound. If this happens select a dierent
user number.
EntPin
4) Enter the new PIN for the user you have selected.
If an error tone sounds, try a dierent PIN. The display
will show ==== as you enter the new PIN.
5) Press [OK] to save and exit, or press [MENU] to exit
without saving.
Access > PIN Codes > DELPin
Delete PIN

-

MENU 1-1-3
This menu allows a master user or Installer the ability
delete another users PIN. A Master user can only delete a
PIN for users that have been assigned to the same area(s)
as the Master user. A Master user cannot delete their own
PIN.
1) Enter your Installer PIN or Master PIN + [MENU].
2) Enter [1] + [1] + [3] + [OK].
The keypad will display the Ur = prompt.
Ur=
3) Enter the user number you want to delete, then
press [OK].
Del ?
If you have selected a valid user, the system will ask
you to conrm the deletion.
4) Press [OK] to delete the PIN, or press [MENU] to
cancel.
Access > PIN Codes > L114
View PIN

MENU 1-1-4
This menu allows the Installer to view the actual PIN for
any user.
1) Enter your Installer PIN + [MENU].
2) Press [MENU] + [1] + [1] + [4] and enter the user to
view, then press [OK].
Ur=
3) The PIN will always display 6 digits however only
the number of digits corresponding to the global
PIN Length setting are valid.

Bosch Solution 16i Specifications

General

Brand	Bosch
Model	Solution 16i
Category	Security System
Language	English