SmartControl™ Meter & TouchPoint™ 15 9E-926
Operation Instructions
2.1.8 Keypad and Display Functions
2.1.8.1 Unlock Keys
The keypad is “locked” in various modes and may have to be
unlocked to perform a special function. An example of this
would be a diagnostic command. Entering the number se-
quence of “9173” will unlock the keypad. As the digits are
pressed they will appear on the LCD display and if the wrong
number is entered during the sequence it is necessary to start
over.
3. Screen 1: Locked Keys l926_3
L/min Fills
Washing
Enter 9173 to Unlock
Strt End Lock
Wash Wash Keys
Additional Parameters:
1. SmartDairy™ Controller not required
2. Used on all parlor types
Procedure:
1. Enter “9173” to unlock the keypad.
2. Using the [ ] (F4) key scroll through the available Function
Keys and select the desired Function Key.
To Next Page
Loading...