Boumatic TouchPoint - Recall Cow Data

SmartControl™ Meter & TouchPoint™ 31 9E-926
Operation Instructions
2.1.10.2 Recall Cow Data
If a cow number has been assigned it is possible to have the
SmartDairy™ Controller display several screens of data about
the current cow.
Parameters:
1. SmartDairy Controller required
2. Used on all parlor types
Procedure:
1. Using the [ ] (F4) key, scroll through the available Func-
tion Keys until [Data 1] (F1)is available.
22. Screen 20: Recall Cow Data l926_22
3.5 23.5
Time Milk
Cow 7705
Milk Weight (lb) 23.47
Expected Milk 47.80
MS/cm 5.3( 7.6)
Data Data Data
1 2 3
2. Press the appropriate Function Key (F1, F2, or F3) for the
data you wish to display.
3. The current Cow Number will be shown in the LED display,
and a screen of data will be shown.
23. Screen 21: Recall Cow Data l926_23
7705
Cow Number
(Notice: the data to be
displayed will be
determined by the
SmartDairy™ Controller)
Data Data Data
4. To change the data which is displayed choose one of the
following options:
-Press one of the other Function keys to display a
different set of data.
-Do not touch anything. After sixty seconds, the screen
will revert to normal.
-[ ] (F4) cancel the Recall Cow Data function and
return the display to normal.