SmartControl™ Meter & TouchPoint™ 49 9E-926
Operation Instructions
The electronic control contains a microprocessor circuit that
determines the oat position by monitoring the action of the
level sensing probe imbedded in the outlet stem. The position
of the oat with respect to time is used to calculate the actual
milk ow rate. The control signals a vacuum solenoid valve to
empty the measuring chamber when full. It also calculates the
actual milk ow rate. When the target ow rate is reached it
signals the detach solenoid to shut off vacuum to the cluster
and retract the detach mechanism to remove the cluster. The
probe assembly is not a repairable item.
To Next Page
Loading...