Brady BBP 33 - Password Protection

BBP
®
33 Sign & Label Printer User’s Manual 3-13
Tools
Password Protection
Password Protection
Use this procedure to enable password protection or to change a password.
Passwords can be enabled for the Output Settings or Printer Settings menus.
Enable Protection
To enable password protection:
1. Press
to go to the navigation menu.
2. Press S or T to scroll to Tools, then press .
3. Press T to scroll to Password, then press .
4. At the prompt, enter the password by using a combination of arrow keys and
buttons, then press .
Note: The default password is DULR (down, up, left right).
5. Press to accept Enable Protection.
6. Press S or T to select either Off or On, then press .
7. When done, press W repeatedly to exit to the main menu.