Brady BBP 33 - Contrast; Standby Interval

BBP
®
33 Sign & Label Printer User’s Manual 3-7
Printer Settings
Standby Interval
Contrast
To set the contrast:
1. Press to go to the navigation menu.
2. Press S or T to scroll to Printer Settings, then press .
3. Press T to scroll to Contrast, then press .
4. Press S or T to increase or decrease the contrast setting. Contrast values
are between 1 and 20.
5. Press to accept the change.
6. When done, press W twice to exit to the main menu.
Standby Interval
The standby interval time determines when the navigation menu will go into
standby mode after a period of inactivity. The standby interval turns off the
backlight on the display.
To set the standby interval:
1. Press to go to the navigation menu.
2. Press S or T to scroll to Printer Settings, then press .
3. Press T to scroll to Standby Interval, then press .
4. Press S or T to choose between 1 to 4 minutes.
5. Press to accept the change.
6. When done, press W twice to exit to the main menu.