Brady BBP 33 - Upgrade from USB Flash Drive

3-16 BBP
®
33 Sign & Label Printer User’s Manual
Tools
Upgrade from USB Flash Drive
Upgrade from USB Flash Drive
Use this procedure to upgrade the firmware or software from a USB flash drive
that contains the upgrade. The system will support only one USB device at a time.
To upgrade software from a USB flash drive:
CAUTION!
Do not interrupt power during an upgrade from a USB flash drive.
1. Copy the upgrade files to the root directory of your USB flash drive.
2. Connect the USB flash drive to any available USB port on the printer.
3. Press
to go to the navigation menu.
4. Press S or T to scroll to Tools, then press .
5. Press T to scroll to Upgrade from USB, then press . The printer
automatically downloads and installs the firmware/software from the root
directory of the USB flash drive.
Note: During the upgrade, the screen goes blank. It may take a few moments
for the upgrade to complete. When done, the printer returns to the Ready
menu.