BBP
®
33 Sign & Label Printer
User’s Manual
2-13
Connect Printer to a PC via USB
Rebooting the Printer
Connect Printer to a PC via USB
To use your PC with the BBP
®
33 Sign & Label Printer, you must have the USB
device driver installed on your PC.
Note: See “Compatible Applications” on page 1-2 for a list of software applications
that are compatible with the BBP
®
33. Refer to your labeling software
documentation for instructions about installing and using the software.
To install the USB device driver:
1. Go to “Install USB Driver (only)” on page 2-39.
To Next Page
Loading...
