Brady BBP 33 - Printer Settings; Language; Units

3-6 BBP
®
33 Sign & Label Printer User’s Manual
Printer Settings
Units
Printer Settings
The Printer Settings menu lets you set the default values for the printer. Defaults
are common settings that are pre-assigned to make the system usable as soon as
power is applied (e.g., set date and time to your local date and time). By changing
the defaults, you can set the printer to your specific requirements.
Any defaults set here will stay in effect even when power is removed from the
printer, and also during upgrades.
Note: If password protection has been implemented, you will need to enter a
password to have access to these functions.
Language
To change language setting:
1. Press to go to the navigation menu.
2. Press S or T to scroll to Printer Settings, then press .
3. Press T to scroll to Language, then press .
4. Press S or T to scroll to the language you want.
5. Press to accept the change. It takes a few moments for the settings to
take effect.
6. When done, press W twice to exit to the main menu.
Units
To change unit setting:
1. Press to go to the navigation menu.
2. Press S or T to scroll to Printer Settings, then press .
3. Press T to scroll to Units, then press .
4. Press S or T to select Inches or Millimeters.
5. Press to accept the change.
6. When done, press W twice to exit to the main menu.