Brady BBP 33 - Installing a Brady Network Card

BBP
®
33 Sign & Label Printer User’s Manual 2-15
Brady Network Cards
Installing a Brady Network Card
Installing a Brady Network Card
If your Brady printer is equipped with a Brady Network Card (WiFi or Ethernet),
you can configure the printer to run as a local printer (physically attached to your
PC via a USB cable) and as a network (shared) printer through Ethernet or WiFi.
To establish the printer as a network printer, you must configure the Brady
Network Card to recognize and work with your networks. The Brady Printer
Drivers CD contains the installation wizards for the Brady printer drivers and also
the Brady Network Card configuration. The printer drivers and Brady Network
Card drivers can also be downloaded from the Brady website at
www.bradyid.com.
The network card installation and configuration wizard identifies the following
installation scenarios:
• WiFi (first time)
• Ethernet (first time)
• Additional PC’s
•USB Driver
• Adhoc (first time)