Branson 2000X Series User Manual

100-214-276 Rev. 3 i
2000X aed Actuator
Instruction Manual
Index
Numerics
15kHz Stack Assembly - - - - - - - - - - - - - - - - - - - - - 4-34
A
About Installation - - - - - - - - - - - - - - - - - - - - - - - - 4-2
Actuator
Base - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-3
Slide Mechanism - - - - - - - - - - - - - - - - - - - - - - - 5-3
Support - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-3
Actuator (Alone) - - - - - - - - - - - - - - - - - - - - - - - - - 3-3
Actuator Controls - - - - - - - - - - - - - - - - - - - - - - - - 6-1
Actuator Mounting Bolts - - - - - - - - - - - - - - - - - - - - - 4-7
Actuator Pneumatic Schematic- - - - - - - - - - - - - - - - - - 5-5
Actuator Settings, Initial - - - - - - - - - - - - - - - - - - - - - 6-2
Actuator Alignment and Height (Horn travel)- - - - - - - - - - 6-4
Downspeed Control - - - - - - - - - - - - - - - - - - - - - 6-3
Emergency Stop - - - - - - - - - - - - - - - - - - - - - - - 6-5
Factory Air Source - - - - - - - - - - - - - - - - - - - - - - 6-3
Mechanical Stop - - - - - - - - - - - - - - - - - - - - - - - 6-4
Regulated Air Pressure and Air Pressure Gauge - - - - - - - 6-2
aed Actuator
Dimensional Drawing- - - - - - - - - - - - - - - - - - - - - 4-13
Air Cylinder Consumption - - - - - - - - - - - - - - - - - - - - 4-11
Air Filter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-16
Air filter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-16
Allen wrench
M8 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-8
Assemble the Acoustic Stack
For a 15 kHz System - - - - - - - - - - - - - - - - - - - - - 4-34
For a 20 kHz System - - - - - - - - - - - - - - - - - - - - - 4-34
For a 30 kHz System - - - - - - - - - - - - - - - - - - - - - 4-35
For a 40 kHz System - - - - - - - - - - - - - - - - - - - - - 4-35
Assemblling the 20kHz Acoustic Stack - - - - - - - - - - - - - - 4-36
DOC EXPIRES 12PM 7/24/2012. Article or Material must comply with the requirements
stipulated by RoHS in its current version

Branson 2000X Series Specifications

General

Frequency	20 kHz
Overload Protection	Yes
Frequency Range	19.5 kHz to 20.5 kHz
Voltage	50/60 Hz
Operating Temperature	0 - 40° C