brielmaier S250 - Page 49

Brielmaier Motormäher GmbH Start-up | 4
BA Motor mower S250 (Version 2021/09) 49
Connecting the attachment
The attachment is connected as follows:
1
a) Open the quick-release lever (1) on the machine.
b) Start the machine and carefully move it towards the attachment to be
connected:
Reduce the speed accordingly using fine adjustment or clutch/brake
lever (see chapter Driving [}61]).
5
3
2
c) Slightly tilt the machine forward and hook the upper part of the quick-
release fastener (2) on the machine into the quick-release coupling (3)
on the attachment.
d) Press the machine down on the handlebars until the quick-release
fastener engages.
4
e) Close the quick-release lever (4).
5
f) Secure the quick-release lever with the safety cotter pin (5).
6
7
g) Loosen the locking screw (7) on the support foot (6) (if present).
h) Pull the support foot up and fix it with the locking screw.
i) Switch off the machine.
8
9
j) Attach the return line (9) (thick hose).
k) Attach the supply line (8) (thin hose).
ð The attachment is connected to the machine.