brielmaier S250 - Page 92

7 | Maintenance Brielmaier Motormäher GmbH
92 BA Motor mower S250 (Version 2021/09)
Setting the rake tedder
To set the rake tedder:
a) Connect the rake tedder mechanically and electrically.
b) Start the machine normally.
c) Start the engine.
d) Leave speed level at "0".
1
2
e) Briefly press the "Change direction of travel" button (1) on the left grip
and the "Menu" button (2) on the right grip simultaneously.
3
ð The "Fault" display (3) flashes.
f) Swivel the rake tedder handlebars several times into both end positions.
g) Swivel the rake tedder handlebars so that the wheels are aligned for
straight travel.
4
5
h) Briefly press the "Change direction of travel" button (4) on the left
handle and the "Menu" button (5) on the right handle at the same
time.
ð The "fault" display (3) goes out.
ð The rake tedder is ready for operation.