EasyManuals Logo

Brother DCP-8065DN Servise Manual

Brother DCP-8065DN
495 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #338 background imageLoading...
Page #338 background image
Confidential
9-14
(10) Video signal reception
Code 1 Code 2 Causes
A0 03 Error correction sequence not terminated even at the final
transmission speed for fallback.
A0 11 Receive buffer empty. (5-second time-out)
A0 12 Receive buffer full during operation except receiving into
memory.
A0 13 Decoding error continued on 500 lines.
A0 14 Decoding error continued for 10 seconds.
A0 15 Time-out: 13 seconds or more for one-line transmission.
A0 16 RTC not found and carrier OFF signal detected for 6 seconds.
A0 17 RTC found but no command detected for 60 seconds.
A0 18 Receive buffer full during receiving into memory.
A0 19 No video data to be sent
A8 01 RTN, PIN, or ERR received at the calling terminal. *
A9 01 RTN, PIN, or ERR received at the called terminal. *
* Available in German models only
(11) General communications-related
Code 1 Code 2 Causes
B0 02 Unable to receive the next-page data.
B0 03 Unable to receive polling even during turn-around transmission
due to call reservation.
B0 04 PC interface error.
BF 01 Communication canceled by pressing the [Stop/Exit] key before
establishment of FAX communication*.
BF 02 Communication canceled by pressing the [Stop/Exit] key after
establishment of FAX communication*.
BF 03 Transmission canceled due to a scanning error caused by no
document or document feed problem in ADF scanning in real time
transmission.
* Establishment of FAX communication:
FAX communication is established when the calling station receives a DIS (reception
capability) signal from the called station and the called station receives an NSS or DCS
(communications test) signal from the calling station.
(12) Maintenance mode
Code 1 Code 2 Causes
E0 01 Failed to detect 1300 Hz signal in burn-in operation.
E0 02 Failed to detect PB signals in burn-in operation.
(13) Equipment error
Code 1 Code 2 Causes
FF X X Equipment error (For X X, refer to Section 9.1.1.2.)

Table of Contents

Other manuals for Brother DCP-8065DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother DCP-8065DN and is the answer not in the manual?

Brother DCP-8065DN Specifications

General IconGeneral
Duplex printingYes
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Time to first page (black, normal)8.5 s
Print speed (black, normal quality, A4/US Letter)28 ppm
Scan toe-mail, file, image, OCR
Input color depth48 bit
Copier resize25 - 400 %
Maximum copy resolution1200 x 600 DPI
Maximum number of copies99 copies
Copy speed (black, normal quality, A4)28 cpm
Total input capacity250 sheets
Total output capacity150 sheets
Auto document feeder (ADF) input capacity50 sheets
Internal memory32 MB
Maximum internal memory544 MB
Sound power level (standby)30 dB
Sound pressure level (printing)55 dB
DisplayLCD
Market positioningBusiness
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Maximum ISO A-series paper sizeA4
Font styles66 Scaleable fonts, Letter, Gothic 16.66, OCR-A, OCR-B, 11 Barcodes
Dimensions (WxDxH)531 x 450 x 475 mm
Networking features10/100 Base-TX
All-in-one functionsCopy, Scan
Color all-in-one functionsscan, n
Compatible operating systemsMac OS X 10.2.4 or greater Windows XP
Standard interfacesUSB 2.0
Sustainability certificatesENERGY STAR
Power consumption (standby)85 W
Power consumption (PowerSave)15 W
Power consumption (average operating)660 W

Related product manuals