Brother MFC-9560CDW - Page 115

2-76
Confidential
■ Error code 9F
No paper is loaded.
.
■ Error code A0
Timeout error during waiting for completion of second side scanning data transfer.
---
Step Cause Remedy
1 Coming off of T1 paper edge
actuator
Re-assemble the T1 paper edge actuator.
2 Coming off of registration front
actuator
Re-assemble the registration front
actuator.
3 Coming off of MP registration
front actuator
Re-assemble the MP registration front
actuator.
4 Harness connection failure of
T1 registration front/rear sensor
PCB ASSY
Check the harness connection of the
T1 registration front/rear sensor PCB
ASSY and reconnect it.
5 Harness connection failure of
MP paper empty/registration
front sensor PCB ASSY
Check the harness connection of the
MP paper empty/registration front sensor
PCB ASSY and reconnect it.
6 T1 registration front/rear sensor
PCB ASSY failure
Replace the T1 registration front/rear
sensor PCB ASSY.
7 MP paper empty/registration
front sensor PCB ASSY failure
Replace the MP paper empty/registration
front sensor PCB ASSY.
8 Main PCB failure Replace the main PCB ASSY.
Scan Unable
Remove the original document. Turn the power off, then on again.
Step Cause Remedy
1 Second side scanning CIS
failure
Replace the second side scanning CIS.
2 Main PCB failure Replace the main PCB ASSY.