Brother MFC MFC-9120CN User Manual

Printing photos from a digital camera (MFC-9320CW only)
97
13
d Enter the password. Press OK.
Change ID
PIN:XXXX
Note
If your ID has restricted options, the
following messages appear on the LCD.
e The LCD shows the following message
depending on which mode the machine
is in:
04/20 15:30 Fax
Camera Connected
Scan:Select ab
Camera Connected
Stack Copies:01
Camera Connected
f Set your camera to print an image. Set
the number of copies if you are asked.
When the machine starts printing an
image, the LCD will show the following
message:
PictBridge
Printing. Kee...
Note
Please refer to the documentation
supplied with your camera for detailed
operations how to print using PictBridge.
IMPORTANT
DO NOT remove the digital camera from
the USB direct interface until the printer
has finished printing.
Message Meaning
Access Denied Printing documents
directly from a camera to
the Brother machine is
restricted.
Limit Exceeded The number of pages you
are allowed to print is
exceeded. The print job
will be cancelled.
Mono Print Only Printing colour
documents is restricted.
Not Available Printing pictures directly
from a camera to the
Brother machine is
restricted.

Brother MFC MFC-9120CN Specifications

General

Print Technology	Laser
Connectivity	USB 2.0, Ethernet
Duplex Printing	Manual
ADF Capacity	35 sheets
Fax Modem Speed	33.6 Kbps
Functions	Print, Copy, Scan, Fax
Maximum Printing Speed (Black)	17 ppm
Maximum Printing Speed (Color)	17 ppm
Monthly Duty Cycle	Up to 30, 000 pages
Scanning Resolution	Up to 19200 x 19200 dpi (interpolated)
Optical Scan Resolution	1200 x 2400 dpi
Memory	64 MB
Paper Handling	250-sheet input tray
Scanner Type	Flatbed
Copy Speed	Up to 17 cpm
Paper Capacity	250 sheets
Print Speed	Up to 17 ppm (Black/Color)