Chapter 6
48
Receive Mode settings 6
Ring Delay 6
The Ring Delay setting sets the number of
times the machine rings before it answers in
Fax Only and Fax/Tel modes.
If you have external or extension telephones
on the same line as the machine, choose the
maximum number of rings. (See Operation
from external or extension telephones
on page 60 and Fax Detect on page 49.)
a Make sure you are in Fax mode .
b Press Menu, 2, 1, 1.
c Press a or b to choose how many times
the line rings before the machine
answers (02-10 for Australia, 01-10 for
New Zealand, 00-10 for some countries).
Press OK.
d Press Stop/Exit.
F/T Ring Time
(Fax/Tel mode only) 6
When somebody calls your machine, you and
your caller will hear the normal telephone ring
sound. The number of rings is set by the Ring
Delay setting.
If the call is a fax, then your machine will
receive it; however, if it is a voice call the
machine will sound the F/T ring (a fast
double-ring) for the time you have set in the
F/T Ring Time setting. If you hear the F/T ring
it means that you have a voice caller on the
line.
Because the F/T ring is made by the machine,
extension and external telephones will not
ring; however, you can still answer the call on
any telephone. (For more information see
Using Remote Codes on page 61.)
a Make sure you are in Fax mode .
b Press Menu, 2, 1, 2.
c Press a or b to choose how long the
machine will ring to alert you that you
have a voice call (20, 30, 40 or
70 seconds for Australia and some
countries, 20, 30, 40 or 55 seconds for
New Zealand).
Press OK.
d Press Stop/Exit.
To Next Page
Loading...
Need help?
General
