Chapter 8
64
d Press Mono Start or Colour Start.
Note
• If you do not enter a letter and press OK in
step b, all registered names will appear.
Press a or b to scroll until you find the
name you are looking for.
• If the LCD shows No Contact Found
when you enter the first few letters of the
name, it means that a name for the letter
is not stored.
Fax redial 8
If you are sending a fax automatically and the
line is busy, the machine will automatically
redial up to three times at five minute
intervals.
If you are sending a fax manually and the line
is busy, press Redial/Pause, wait for the
other fax machine to answer, and then press
Mono Start or Colour Start to try again. If
you want to make a second call to the last
number dialled, you can save time by
pressing Redial/Pause and Mono Start or
Colour Start.
Redial/Pause only works if you dialled from
the control panel.
Storing numbers 8
You can set up your machine to do the
following types of easy dialling: One Touch,
Speed Dial and Groups for Broadcasting
faxes. You can also specify the default
resolution for each One Touch and Speed
Dial number. When you dial a quick dial
number, the LCD shows the name, if you
stored it, or the number. A scan profile can
also be stored along with the fax number.
If you lose electrical power, the quick dial
numbers stored in the memory will not be lost
because they are stored permanently.
A scan profile is the resolution and other scan
settings that you choose when you store a
number. For example, you will be asked to
select Standard (Std), Fine, or Photo if you
have selected the I-FAX option. Or, you will
be asked to select B&W 200 dpi,
B&W 200 × 100 dpi, Gray 100 dpi,
Gray 200 dpi, Gray 300 dpi, Color 100 dpi,
Color 200 dpi, Color 300 dpi or Color 600 dpi
if you selected the E-Mail option. (I-FAX,
Fax/Tel and E-mail options are available as a
download.)
Storing a pause 8
Press Redial/Pause to insert a 3.5-second
pause between numbers. You can press
Redial/Pause as many times as needed to
increase the length of the pause.
To Next Page
Loading...
Need help?
General
