Brother MFC MFC-9120CN User Manual

Remote Fax Options (black & white only)
75
9
Turning off Remote Fax
Options 9
a Press Menu, 2, 5, 1.
b Press a or b to choose Off.
Press OK.
Note
The LCD will give you options if there are
received faxes still in your machine’s
memory. (See Changing Remote Fax
Options on page 74.)
c Press Stop/Exit.
Remote retrieval 9
The remote retrieval feature lets you retrieve
your stored fax messages when you are not
at the machine. You can call your machine
from any touch tone phone or fax machine,
then use the Remote Access Code to retrieve
your messages.
Setting a Remote Access
Code 9
The Remote Access Code feature lets you
access the remote retrieval features when
you are away from your machine. Before you
use the remote access and retrieval features,
you have to set up your own code. The
default code is an inactive code: – – –l.
a Press Menu, 2, 5, 2.
b Enter a three-digit code using the
numbers 0 – 9, l or #.
Press OK.
c Press Stop/Exit.
Note
Do not use the same code used for your
Remote Activation code (l51 (l91 for New
Zealand)) or Remote Deactivation code
(#51 (#91 for New Zealand)). (See
Changing the Remote Codes
on page 62.)
You can change your code at any time. If you
want to make your code inactive, press
Clear/Back and OK in b to restore the
default setting – – –l.

Brother MFC MFC-9120CN Specifications

General

Print Technology	Laser
Connectivity	USB 2.0, Ethernet
Duplex Printing	Manual
ADF Capacity	35 sheets
Fax Modem Speed	33.6 Kbps
Functions	Print, Copy, Scan, Fax
Maximum Printing Speed (Black)	17 ppm
Maximum Printing Speed (Color)	17 ppm
Monthly Duty Cycle	Up to 30, 000 pages
Scanning Resolution	Up to 19200 x 19200 dpi (interpolated)
Optical Scan Resolution	1200 x 2400 dpi
Memory	64 MB
Paper Handling	250-sheet input tray
Scanner Type	Flatbed
Copy Speed	Up to 17 cpm
Paper Capacity	250 sheets
Print Speed	Up to 17 ppm (Black/Color)