EasyManuals Logo

Brother MFC MFC-9120CN User Manual

Brother MFC MFC-9120CN
256 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #180 background imageLoading...
Page #180 background image
168
Note
Discard used consumable items according to local regulations, keeping it separate from
domestic waste. If you have questions, call your local waste disposal office. Be sure to reseal
the consumable items tightly so that the material inside does not spill.
We recommend placing used consumable items on a piece of paper to prevent accidentally
spilling or scattering the material inside.
If you use paper that is not a direct equivalent for the recommended paper, the life of
consumable items and machine parts may be reduced.
The projected life of the cartridge is based on ISO/IEC 19798. Frequency of replacement will
vary depending on the complexity of printed pages, percentage of coverage and type of media
used.
Replacing a Toner cartridge C
The Standard toner cartridges can print
approximately 2,200 pages (black) or
approximately 1,400 pages (yellow, magenta,
cyan)
1
. Actual page count will vary
depending on your average type of
document. The machine is supplied with a
Starter toner cartridge that will need to be
replaced after approximately 1,000 pages
1
.
When a toner cartridge is running low, the
LCD shows Toner Low.
1
Approx. cartridge yield is declared in accordance
with ISO/IEC 19798.
Note
It is a good idea to keep a new toner
cartridge ready for use when you see the
Toner Low warning.
To ensure high quality printing, we
recommend that use only Genuine
Brother Brand toner cartridges. When you
want to buy toner cartridges, please call
your Brother dealer.
We recommend that you clean the
machine when you replace the toner
cartridge. See Routine maintenance
on page 155.
If you change the print density setting for
lighter or darker printing, the amount of
toner used will change.
Wait to unpack the toner cartridge until
immediately before you put it into the
machine.
Toner Low message C
Toner Low
Prepare...
If the LCD shows Toner Low
Prepare New X Toner Cartridge.,
the machine has nearly run out of toner. Buy
a new toner cartridge and have it ready
before you get a Replace Toner message.
The LCD shows the toner colour that is near
the end of its life (Black, Yellow, Magenta or
Cyan).
Replace Toner message C
When the following message appears on the
LCD, you need to replace the toner cartridge:
Replace Toner
The scrolling message on the LCD indicates
which colour you need to replace.
a Turn off the machine. Unplug the
telephone line cord first, and then
unplug the power cord from the
electrical socket.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC MFC-9120CN and is the answer not in the manual?

Brother MFC MFC-9120CN Specifications

General IconGeneral
Print TechnologyLaser
ConnectivityUSB 2.0, Ethernet
Duplex PrintingManual
ADF Capacity35 sheets
Fax Modem Speed33.6 Kbps
FunctionsPrint, Copy, Scan, Fax
Maximum Printing Speed (Black)17 ppm
Maximum Printing Speed (Color)17 ppm
Monthly Duty CycleUp to 30, 000 pages
Scanning ResolutionUp to 19200 x 19200 dpi (interpolated)
Optical Scan Resolution1200 x 2400 dpi
Memory64 MB
Paper Handling250-sheet input tray
Scanner TypeFlatbed
Copy SpeedUp to 17 cpm
Paper Capacity250 sheets
Print SpeedUp to 17 ppm (Black/Color)

Related product manuals