Chapter 8
68
Changing One Touch and
Speed Dial numbers 8
If you try to store a One Touch or Speed Dial
number over an existing number, the LCD will
show the name or number already stored
there. If your machine has a scheduled job or
you have set a fax forwarding number, the
LCD will ask you if you want to change the
number.
a Do one of the following:
To change a stored One Touch
number, press Menu, 2, 3, 1.
Press OK.
OneTouchDial
Select One Touch
Choose the One Touch number you
want to change.
To change a stored Speed Dial
number, press Menu, 2, 3, 2.
Press OK.
Speed Dial
Speed Dial? #
Choose the Speed Dial number you
want to change, then press OK.
b Do one of the following:
To change the stored number, press
1.
To exit without making a change,
press 2.
#005:MIKE
1.Change 2.Exit
c Enter a new number or character.
Press OK.
d Press d or c to position the cursor under
the character you want to change, and
then press Clear/Back to delete it.
Repeat for each character you want to
delete.
e If you want to save a fax resolution along
with the number, choose one of the
options below:
To store the fax resolution, press a or
b to select Std, Fine, S.Fine or
Photo.
Press OK.
Press OK if you don’t want to change
the default resolution.
f Press Stop/Exit.
If you downloaded I-FAX, Fax/Tel and
E-mail options
a Do one of the following:
To change a stored One Touch
number, press Menu, 2, 3, 1.
Press OK.
One Touch Dial
Select One Touch
Choose the One Touch number you
want to change.
To change a stored Speed Dial
number, press Menu, 2, 3, 2.
Press OK.
Speed Dial
Speed Dial? #
Choose the Speed Dial number you
want to change then press OK.
b Do one of the following:
To change the stored number,
press 1.
To exit without making a change,
press 2.
#005:MIKE
1.Change 2.Exit
c Press a or b to select Fax/Tel, E-Mail
or IFAX.
Press OK.
To Next Page
Loading...
Need help?
General
